Day: September 27, 2020

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4488-22-6,[1,1′-Binaphthalene]-2,2′-diamine,as a common compound, the synthetic route is as follows.

To a solution of BINAM (100 mg, 0.35 mmol) and pyridine (85 mL, 1.05 mmol) inacetnitrile (3.5 mL) was added p-toluenesulfonylchloride (73 mg, 0.38 mmol), and the mixture was refluxed for 12 h. After cooling to ambient temperature, the reaction was quenched with brine (10 mL) and extracted with EtOAc (15 mL¡Á 3). The combined organic extracts were dried (MgSO4) and concentrated. The residue was purifiedby column chromatography on silica gel using hexane-EtOAc as the eluent, to give A-2; yield: 119 mg (78%)., 4488-22-6

The synthetic route of 4488-22-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Zhang, Yu; Mao, Mao; Ji, Yi-Gang; Zhu, Jie; Wu, Lei; Tetrahedron Letters; vol. 57; 3; (2016); p. 329 – 332;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1121-22-8,trans-Cyclohexane-1,2-diamine,as a common compound, the synthetic route is as follows.

Into a solution containing 1,12-diisocyanatododecane (5.04 grams, 20 mmol; obtained from Sigma-Aldrich Fine Chemicals) and a 1:1 mixture of hexane and tetrahydrofuran (75 milliliters) stirring at room temperature was added a solution containing triethylene glycol monomethacrylate (4.36 grams, 20 mmol; obtained as CD570 from Sartomer Company Inc., Exton, Pa.) dissolved in a 1:1 mixture of hexane and tetrahydrofuran (25 milliliters), and dibutyltin dilaurate (0.063 grams, 0.1 mmol; obtained from Sigma-Aldrich Fine Chemicals) as the catalyst. The mixture was stirred and heated to an internal temperature of 40 C. The progress of the reaction was monitored by 1H-NMR spectroscopy for consumption of the triethylene glycol monomethacrylate reactant. The mixture was cooled to about 15 C. temperature, after which to this mixture was added dropwise a solution of trans-1,2-diaminocyclohexane (1.14 grams, 10 mmol; obtained as a racemic mixture of (1R,2R) and (1S,2S) stereoisomers from Sigma-Aldrich Fine Chemicals) dissolved in a 1:1 mixture of hexane and tetrahydrofuran (20 milliliters). The reaction mixture was stirred for 1 hour while warming up to room temperature. FTIR spectroscopic analysis of a reaction sample showed little unreacted isocyanate (peak at 2180 cm-1, sample prepared as a KBr pellet). Any residual isocyanate reagent was quenched by addition of methanol (5 milliliters), The reaction mixture was then filtered by vacuum filtration to give 10.11 grams of a solid product as a white powder (96 percent yield). The product was believed to be of the formulae 1H-NMR spectroscopic analysis of the solid was performed in DMSO-d6 (300 MHz) at room temperature (25 C.) and indicated the above structure with the following assigned peaks: 1.10-1.80 ppm (multiplet, 24 H integration, 20 protons from -NH-CH2(CH2)10CH2-NH- portion and 4 methylene protons from the cyclohexane ring portion); 1.90 ppm (singlet, 3 H integration, -(CO)C(CH3)CH2); 2.95 ppm (narrow multiplet, 4 H integration, -NH-CH2(CH2)10CH2-NH-); 3.35 ppm (multiplet, 1 H, cyclohexane ring methine proton); 3.55 ppm (narrow multiplet, 8 H integration, -(CH2-O) protons); 4.07 ppm and 4.27 ppm (broad singlets, each 2 H integration, NH(CO)OCH2CH2O- and -OCH2CH2O(CO)-C(CH3)CH2); 5.70 ppm and 5.88 ppm (broad singlet, each 1 H integration, urea NH protons); 5.70 ppm and 6.18 ppm (sharp singlet, each 1 H integration, terminal vinyl protons -(CO)C(CH3)CH2); 7.15 ppm (broad singlet, 1 H integration, urethane NH proton). Elemental analysis calculated for: C: 57.80%, H: 8.80%, N: 8.99%. Found for: C: 61.39%, H: 9.28%, N: 7.96%.

1121-22-8, As the paragraph descriping shows that 1121-22-8 is playing an increasingly important role.

Reference£º
Patent; Xerox Corporation; US2006/122415; (2006); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

673-06-3, D-Phenylalanine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

673-06-3, General procedure: Amino acid or peptide (1 mmol) was added with stirring to a solution of guanidine hydrochloride (15 mol%) and di-tert-butyl dicarbonate (2.5-3 mmol) in EtOH (1 mL), at 35-40C. The reaction mixture was continued to stir until a clear solution was obtained. EtOH was evaporated under vacuum and the residue was successively washed with water (2 mL) and hexane or petroleum ether (2 mL) to afford almost pure N-Boc amino acids or N-Boc peptides. If necessary, the crude products could be recrystallized for further purification.

As the paragraph descriping shows that 673-06-3 is playing an increasingly important role.

Reference£º
Article; Jahani, Fatemeh; Tajbakhsh, Mahmood; Golchoubian, Hamid; Khaksar, Samad; Tetrahedron Letters; vol. 52; 12; (2011); p. 1260 – 1264;,
Chiral Catalysts
Chiral catalysts – SlideShare

trans-Cyclohexane-1,2-diamine, cas is 1121-22-8, it is a common heterocyclic compound, the chiral-catalyst compound, its synthesis route is as follows.,1121-22-8

General procedure: A methanolic solution (10mL) of (¡À)-trans-1,2-diaminocyclohexane (dach) (0.23g, 2.0mmol) in a Schlenk tube, was added dropwise to a methanolic solution (20mL) of salicylaldehyde-imidazolium salt H(iPr)sal(Me2Im+-X-) 3a-c (4.0mmol) into a 100mL Schlenk flask under nitrogen atmosphere. The reaction mixture was stirred under N2 at 60C for 3h. Then the solvent was partially removed under reduced pressure, and the yellow products of 4a-c were precipitated by the addition of ethyl acetate and kept in the refrigerator overnight. Solvent was decanted off and the obtained crude product was sonicated for 15min in Et2O (3¡Á25mL). Et2O was also decanted off and the residual solid was washed intensively with MeOH/Et2O mixture (1:2) to remove unreacted materials and then re-dissolved in MeOH. EtOAc was added slowly (?15min) to precipitate the products as pale yellow-dark orange solids which were collected by filtration and dried under vacuum. Samples of the isolated solids were characterized as follows.

With the rapid development of chemical substances, we look forward to future research findings about 1121-22-8

Reference£º
Article; Elshaarawy, Reda F.M.; Kheiralla, Zeinab H.; Rushdy, Abeer A.; Janiak, Christoph; Inorganica Chimica Acta; vol. 421; (2014); p. 110 – 122;,
Chiral Catalysts
Chiral catalysts – SlideShare

602-09-5, [1,1′-Binaphthalene]-2,2′-diol is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

602-09-5, A 300mL eggplant-shaped flask, the raw material 1,1′-bi-2-naphthol (5.4g, 19mmol), Zeolyst Co. weighed Zeolith the CBV780 (2.5g), was suspended was added o- dichlorobenzene (30mL). After the suspension was heated to reflux 18 hours, heating was filtered, washed with toluene column. After concentrating the filtrate to approximately o- dichlorobenzene are others, was precipitated by adding methanol. The resultant solid was filtered to give the intermediate 7 as a white powder (4.6g, 18mmol, 90%). It was identified as the desired compound by FDMS (field desorption mass analysis).

The synthetic route of 602-09-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Idemitsu Kosan Corporation; Ikeda, Yoichi; Ito, Hirokazu; Kawamura, Masahiro; Saito, Hiroyuki; Ikeda, Takeshi; (125 pag.)KR2015/98631; (2015); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

trans-Cyclohexane-1,2-diamine, cas is 1121-22-8, it is a common heterocyclic compound, the chiral-catalyst compound, its synthesis route is as follows.,1121-22-8

First, 5.84g of benzyl (manufactured by Tokyo Kasei Kogyo Co., Ltd) was mixed with 3.17g of trans- 1,2-cyclohexanediamine (manufactured by Kanto Kagaku) by using 150 mL of ethanol as a solvent. Then, the mixed solution was refluxed for 3 hours at 500C. After that, the refluxed solution was cooled to be a room temperature. A deposit was obtained by filtering the refluxed solution. After that, 2,3-diphenyl-4a,5,6,7,8,8a-hexahydroquinoxaline was obtained by recrystallizing the deposit with ethanol (light yellow crystal, yield: 96%). Subsequently, 7.66g of 2,3-diphenyl-4a,5,6,7,8,8a-hexahydroquinoxaline, which was obtained in the above step, was mixed with 8.62g of iron chloride (III) by using 80 mL of ethanol as a solvent. Then the mixed solution was gently stirred with heat for 3 hours. After the stirring, a ligand 2,3-diphenyl-5,6,7,8-tetrahydroquinoxaline (abbreviation: DPQtH) was obtained by adding water (milky white powder, tield: 88%).

With the rapid development of chemical substances, we look forward to future research findings about 1121-22-8

Reference£º
Patent; SEMICONDUCTOR ENERGY LABORATORY CO., LTD.; WO2006/104177; (2006); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

673-06-3, D-Phenylalanine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Both L- and D-alpha-bromo-phenylalanine were synthesized using 1.6 eq sodium nitrite in a 48% HBr/H 2 O solution as described by Baidola et. al 9 . L-alpha-bromo-tryptophan and DL-1-alpha-bromo-naphthylalanine were both synthesized with 1.9 eq sodium nitrite and 3.7 eq KBr in 4.4 eq 0.75M HBr as defined by Souers et. al 1 . Additional information regarding synthesis is given below., 673-06-3

As the paragraph descriping shows that 673-06-3 is playing an increasingly important role.

Reference£º
Article; Samuels, Eric R.; Sevrioukova, Irina F.; Tetrahedron Letters; vol. 59; 12; (2018); p. 1140 – 1142;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1121-22-8,trans-Cyclohexane-1,2-diamine,as a common compound, the synthetic route is as follows.

Toa solution of trans-1,2-diaminocyclohexane(20.4 mL, 0.170 mol) in N,N-dimethylformamide(82 mL) was added 2-pyridinecarboxaldehyde (35.6 mL, 0.375 mol) with moderateswirling, resulting in moderate warming.After 24 hours, crystals were collected by fitration, rinsed with N,N-dimethylformamide (75 mL) and water(100 mL), and dried in vacuo (trans-N,N?-bis(pyridin-2-ylmethylene)-1,2-diaminocyclohexane, 40.52 g,81.5%, spectra matching those reported).ADDIN EN.CITESchoumacker20031607[1]1607160717Schoumacker,S.Hamelin, O.Pecaut,J.Fontecave,M.CatalyticAsymmetric Sulfoxidation by Chiral Manganese Complexes: Acetylacetonate Anions as ChiralitySwitchesInorg.Chem.Inorg.Chem.8110-8116422003[1] Amixture of trans-N,N?-bis(pyridin-2-ylmethylene)-1,2-diaminocyclohexane (30.13 g,0.1030 mol) and sodium borohydride (12.04 g, 0.3183 mol) in ethanol (95%, 760mL) was stirred vented to an oil bubbler for three days. The mixture was chilled in an ice-water bathfor 1 hour, and hydrochloric acid (12 M, 55 mL) was added in portions, and theresulting solution was confirmed to be acidic.Solvent was removed by rotary evaporation, and the resulting stickysolid was dissolved in water (300 mL) and washed with methylene chloride (3 x175 mL). To the remaining aqueoussolution was added aqueous sodium hydroxide (50% by weight, 30 mL). The resulting mixture was confirmed to bebasic and left at ambient temperature to cool for 30 minutes. It was extracted with methylene chloride (3 x370 mL), and the combined organic extracts were dried for 48 hours overanhydrous sodium sulfate (15 g) and anhydrous potassium carbonate (15 g). Solids were removed by filtration, andsolvent was removed by rotary evaporation.The resulting oil was dried on a Schlenk line and placed in a -20 Cfreezer overnight. Upon warming to roomtemperature, it solidified to a waxy yellow solid (trans-N,N?-bis(pyridin-2-ylmethyl)-1,2-diaminocyclohexane,picchxn, 1, 29.88 g, 97.87%, spectramatching those reported). ADDIN EN.CITESchoumacker20031607[1]1607160717Schoumacker,S.Hamelin, O.Pecaut,J.Fontecave,M.CatalyticAsymmetric Sulfoxidation by Chiral Manganese Complexes: Acetylacetonate Anions as ChiralitySwitchesInorg.Chem.Inorg.Chem.8110-8116422003[1] trans-N,N?-bis(pyridin-2-ylmethyl)-1,2-diaminocyclohexane is typicallythe only product observed in the spectra of isolated material However, it may befurther purified by recrystallization of the tetrahydrochloride salt frommethanol/isopropanol.

1121-22-8, As the paragraph descriping shows that 1121-22-8 is playing an increasingly important role.

Reference£º
Article; Bennov, Rachel R.; Berko, David A.; Burgess, Samantha A.; Dimeglio, John L.; Kalman, Steven E.; Ludlum, Jeffrey M.; Nash, Bradley W.; Palomaki, Peter K.B.; Perlow, Daniel B.; Rubin, Jacob A.; Saunders, Janet E.; Scarselletta, Sarah V.; Kastner, Margaret E.; Pike, Robert D.; Sabat, Michal; Keane, Joseph M.; Inorganica Chimica Acta; vol. 438; (2015); p. 64 – 75;,
Chiral Catalysts
Chiral catalysts – SlideShare

673-06-3, D-Phenylalanine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

EXAMPLE 89 (2R)-2-Hydroxy-3-phenylpropanoic acid (J. Med. Chem., 23, 666) Following the procedure of Johnson, 1980, D-phenylalanine (16.5 g, 100 mmol) was dissolved in 1N H2 SO4 (150 ml) and cooled to 0 C. A solution of NaNO2 (10.5 g, 150 mmol) in water (50 ml) was added dropwise. The mixture was stirred for 2 h at 0 C. and for 3 h at 25 C. The product was extracted into ether (5*100 ml) and the combined ether extracts were dried over Na2 SO4 and concentrated in vacuo to about 100 ml. Hexane (300 ml) was added and the product which crystallized out was collected by vacuum filtration to afford the title compound as a colorless solid (9 g, 54%); mp=124-125 C., 673-06-3

673-06-3 D-Phenylalanine 71567, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; Abbott Laboratories; US5164388; (1992); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1121-22-8,trans-Cyclohexane-1,2-diamine,as a common compound, the synthetic route is as follows.

General procedure: Salen ligands were obtained in the stoichiometric reaction of salicylic aldehyde and trans-1,2-diaminocyclohexane in 96% ethanol solution according to [13c]. Reactions were carried out in 50 ml three-neck round-bottomed flask, equipped with reflux condenser, dropping funnel, magnetic stirrer and heating mantle. The solution of trans-1,2-diaminocyclohexane (0,57 ml, 5 mmol) in EtOH (10 ml) was slowly added to a hot solution of appropriate aldehyde (10 mmol) in EtOH (20 ml). The reaction mixture was heated at reflux for 1.5 h. After cooling to room temperature, the yellow precipitate that formed was filtered off and washed with cold EtOH (5 ml). The ligands were used without further purification. (¡À)-trans-N,N-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclo-hexanediamine (H2salcn(2Bu)) (H2salcn(BuOMe)) Anal. Calc. for C36H54N2O2: C, 79.07%; H, 9.95%; N, 5.12%; C/N = 15.44. Found: C, 78.98%; H, 10.25%; N, 5.17%; C/N = 15.27. 1H-NMR (CDCl3): delta = 13.70 (bs, 2H), 8.29 (s, 2H), 7.29 (d, J = 2.40 Hz, 2H), 6.97 (d, J = 2.30 Hz, 2H), 3.31 (m, 2H), 1.94 (m, 2H), 1.87 (m, 2H), 1.73 (m, 2H), 1.47 (m, 2H), 1.40 (s, 18H), 1.23 (s, 18H). Yield: 2.19 g, 80%, mp = 178-181 C.

1121-22-8, 1121-22-8 trans-Cyclohexane-1,2-diamine 43806, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Tomczyk; Nowak; Bukowski; Bester; Urbaniak; Andrijewski; Olejniczak; Electrochimica Acta; vol. 121; (2014); p. 64 – 77;,
Chiral Catalysts
Chiral catalysts – SlideShare