Day: April 1, 2022

The chemical properties of alicyclic heterocycles are similar to those of the corresponding chain compounds. Compound: 4-(Hydroxymethyl)-1,3-dioxolan-2-one, is researched, Molecular C4H6O4, CAS is 931-40-8, about A Polymer-Reinforced SEI Layer Induced by a Cyclic Carbonate-Based Polymer Electrolyte Boosting 4.45 V LiCoO2/Li Metal Batteries, the main research direction is solid electrolyte interphase carbonate polymer electrolyte battery; cobalt lithium oxide battery solid electrolyte battery; lithium metal batteries; polymer electrolytes; polymer matrixes; solid electrolyte interphase (SEI) layers.Product Details of 931-40-8.

Lithium (Li) metal batteries (LMBs) are enjoying a renaissance due to the high energy densities. However, they still suffer from the problem of uncontrollable Li dendrite and pulverization caused by continuous cracking of solid electrolyte interphase (SEI) layers. To address these issues, developing spontaneously built robust polymer-reinforced SEI layers during electrochem. conditioning can be a simple yet effective solution Herein, a robust homopolymer of cyclic carbonate urethane methacrylate is presented as the polymer matrix through an in situ polymerization method, in which cyclic carbonate units can participate in building a stable polymer-integrated SEI layer during cycling. The as-investigated gel polymer electrolyte (GPE) assembled LiCoO2/Li metal batteries exhibit a fantastic cyclability with a capacity retention of 92% after 200 cycles at 0.5 C (1 C = 180 mAh g-1), evidently exceeding that of the counterpart using liquid electrolytes. It is noted that the anionic ring-opening polymerization of the cyclic carbonate units on the polymer close to the Li metal anodes enables a mech. reinforced SEI layer, thus rendering excellent compatibility with Li anodes. The in situ formed polymer-reinforced SEI layers afford a splendid strategy for developing high voltage resistant GPEs compatible with Li metal anodes toward high energy LMBs.

From this literature《A Polymer-Reinforced SEI Layer Induced by a Cyclic Carbonate-Based Polymer Electrolyte Boosting 4.45 V LiCoO2/Li Metal Batteries》,we know some information about this compound(931-40-8)Product Details of 931-40-8, but this is not all information, there are many literatures related to this compound(931-40-8).

Reference:
Chiral Catalysts,
Chiral catalysts – SlideShare

The three-dimensional configuration of the ester heterocycle is basically the same as that of the carbocycle. Compound: 2-Ethylpyrazine(SMILESS: CCC1=NC=CN=C1,cas:13925-00-3) is researched.Synthetic Route of C5H7NOS. The article 《The effect of cocoa alkalization on the non-volatile and volatile mood-enhancing compounds》 in relation to this compound, is published in Food Chemistry. Let’s take a look at the latest research on this compound (cas:13925-00-3).

Alkalization is a process to improve color, dispersibility and flavor of cocoa powder but is likely to have a neg. effect on the phytochems. Hereto, the impact of alkalization degree (none, medium and high) on the potential mood-enhancing compounds corresponding to the four levels of the mood pyramid model (flavanols, methylxanthines, biogenic amines and orosensory properties) was investigated. The phytochem. content, analyzed via UPLC-HRMS, showed reduction of specific potential mood-enhancing compounds upon alkalization, implying a decrease in bitterness and astringency. Moreover, volatile compounds anal. via HS-SPME-GC-MS indicated that alkalization reduced the levels of volatile compounds, responsible for acidity, fruity, floral and cocoa aromas. With respect to the orosensory properties, the cocoa powder palatability was suggested to be increased due to reduced acidity, bitterness, and astringency, while the desired volatile compounds were reduced. However, sensorial anal. is required to link the volatile results with the overall effect on the flavor perception.

From this literature《The effect of cocoa alkalization on the non-volatile and volatile mood-enhancing compounds》,we know some information about this compound(13925-00-3)Application of 13925-00-3, but this is not all information, there are many literatures related to this compound(13925-00-3).

Reference:
Chiral Catalysts,
Chiral catalysts – SlideShare

Nguyen-Phu, Huy; Do, Lien Thi; Shin, Eun Woo published the article 《Investigation of glycerolysis of urea over various ZnMeO (Me = Co, Cr, and Fe) mixed oxide catalysts》. Keywords: glycerolysis urea zinc cobalt chromium iron oxide catalyst.They researched the compound: 4-(Hydroxymethyl)-1,3-dioxolan-2-one( cas:931-40-8 ).Product Details of 931-40-8. Aromatic heterocyclic compounds can be divided into two categories: single heterocyclic and fused heterocyclic. In addition, there is a lot of other information about this compound (cas:931-40-8) here.

In this study, we investigated the glycerolysis of urea over various ZnMeO (Me = Co, Cr, and Fe) mixed oxide catalysts. ZnMeO mixed oxide catalysts were prepared by a co-precipitation method for two Zn/Me ratios, resulting in Zn-rich mixed oxide (Zn2MeO) and Zn-poor mixed oxide (ZnMe2O). In the glycerolysis of urea, the Zn2MeO catalysts exhibited higher glycerol conversion and glycerol carbonate yields than the ZnMe2O catalysts due to the predominance of homogeneous catalysis through Zn isocyanate (NCO) complexes from the Zn2MeO catalysts. Specifically, Zn2CrO was the best catalyst, with the highest yield of glycerol carbonate. Fourier transform IR (FT-IR) and thermogravimetric anal. (TGA) results of the spent catalysts clearly demonstrated the dominant formation of a solid Zn NCO complex over the spent Zn2CrO catalyst, a unique feature indicating that the better catalytic performance of Zn2CrO was due to the addnl. heterogeneous reaction route through the solid Zn NCO complex.

From this literature《Investigation of glycerolysis of urea over various ZnMeO (Me = Co, Cr, and Fe) mixed oxide catalysts》,we know some information about this compound(931-40-8)Product Details of 931-40-8, but this is not all information, there are many literatures related to this compound(931-40-8).

Reference:
Chiral Catalysts,
Chiral catalysts – SlideShare

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Some choline derivatives》. Authors are Hebky, J..The article about the compound:2-Chloroethyl acetatecas:542-58-5,SMILESS:CC(OCCCl)=O).Reference of 2-Chloroethyl acetate. Through the article, more information about this compound (cas:542-58-5) is conveyed.

The orthoformate (I), orthoacetate (II), and orthophosphate (III) of (2-hydroxyethyl)trimethylammonium chloride were prepared from Me3N (IV) in C6H6 and the appropriate 2-chloroethyl ester and identified as their tripicrates. I, II, and III probably break up in vivo into choline chloride, since biol. tests on rabbits showed they had the same activity as choline chloride, but only 1/1000 that of acetylcholine. 2-Chloroethyl orthoformate (V), a colorless, pleasant-smelling, stable liquid, b14 157° (after redistillation), was obtained in 83.4-g. yield (88.1% theory) by fractionally distilling under reduced pressure 2.5 hrs. a mixture of 55.6 g. (0.376 mol.) of HC(OEt)3 and 180 g. anhydrous CH2ClCH2OH with 1 drop saturated alc. HCl. 2-Chloroethyl orthoacetate (VI), a colorless sweet-smelling liquid turning slightly yellow on standing, b13 155-6°, was formed (18 g.) in a similar manner from 16.25 g. (0.1 mol.) MeC(OEt)3 and 50 g. dry CH2ClCH2OH with 1 drop alc. HCl. V (3 g.) and 15 cc. of a 16.9% C6H6 solution of IV heated 8 hrs. in a sealed tube at 100° formed 2 layers, the bottom one of which was I, a glassy, colorless, hygroscopic mass after removing C6H6, washing with H2O, and drying in a vacuum desiccator over P2O5 1 week. I precipitated from absolute alc. with dry Et2O formed white crystals, m. 280° (decomposition). II, obtained from 4.4 g. VI heated in a sealed tube at 80-90° 10 hrs. with 25 cc. of a 16.9% C6H6 solution of IV and treated like I, had properties similar to I. (ClCH2CH2O)3PO (VII) was prepared according to (B.I.O.S. Final Report Number 696, p. 7) from 50 g. CH2ClCH2OH and 27.3 g. POCl3. The colorless product, dried 3 weeks over fused Na2SO4, weighed 23.3 g. VII (5.7 g.) and 20 cc. of a 21% solution of IV heated 10 hrs. in a sealed tube at 80° gave a thick, colorless sirup which changed into a glassy, slightly milky, almost solid hygroscopic mass of III after removing the benzene and drying in a vacuum desiccator over P2O5 3 months. Addition of Na picrate to a concentrated aqueous solution of I formed the tripicrate, HC[OCH2CH2NMe3C6H2O7N3]3, m. 214° after several recrystallizations from 70% EtOH with added charcoal. The crystalline tripicrate of II, MeC[OCH2CH2NMe3C6H2O7N3]3, formed in a similar way from II, m. 187-9°. The tripicrate, of III, OP[OCH2CH2NMe3C6H2O7N3]3, crystallized after 10 days from a solution of Na picrate added to a concentrated aqueous solution of III, m. 192° (repeated recrystallizations from 70% EtOH).

From this literature《Some choline derivatives》,we know some information about this compound(542-58-5)Reference of 2-Chloroethyl acetate, but this is not all information, there are many literatures related to this compound(542-58-5).

Reference:
Chiral Catalysts,
Chiral catalysts – SlideShare

Application of 931-40-8. The fused heterocycle is formed by combining a benzene ring with a single heterocycle, or two or more single heterocycles. Compound: 4-(Hydroxymethyl)-1,3-dioxolan-2-one, is researched, Molecular C4H6O4, CAS is 931-40-8, about Nanodiscs and mass spectrometry: Making membranes fly. Author is Marty, Michael T..

Cells are surrounded by a protective lipid bilayer membrane, and membrane proteins in the bilayer control the flow of chems., information, and energy across this barrier. Many therapeutics target membrane proteins, and some directly target the lipid membrane itself. However, interactions within biol. membranes are challenging to study due to their heterogeneity and insolubility Mass spectrometry (MS) has become a powerful technique for studying membrane proteins, especially how membrane proteins interact with their surrounding lipid environment. Although detergent micelles are the most common membrane mimetic, nanodiscs are emerging as a promising platform for MS. Nanodiscs, nanoscale lipid bilayers encircled by two scaffold proteins, provide a controllable lipid bilayer for solubilizing membrane proteins. This Young Scientist Perspective focuses on native MS of intact nanodiscs and highlights the unique experiments enabled by making membranes fly, including studying membrane protein-lipid interactions and exploring the specificity of fragile transmembrane peptide complexes. It will also explore current challenges and future perspectives for interfacing nanodiscs with MS.

From this literature《Nanodiscs and mass spectrometry: Making membranes fly》,we know some information about this compound(931-40-8)Application of 931-40-8, but this is not all information, there are many literatures related to this compound(931-40-8).

Reference:
Chiral Catalysts,
Chiral catalysts – SlideShare

In general, if the atoms that make up the ring contain heteroatoms, such rings become heterocycles, and organic compounds containing heterocycles are called heterocyclic compounds. An article called Cascade Membrane System for Separation of Water and Organics from Liquid By-Products of HTC of the Agricultural Digestate-Evaluation of Performance, published in 2021, which mentions a compound: 13925-00-3, Name is 2-Ethylpyrazine, Molecular C6H8N2, Application of 13925-00-3.

New regulations aimed at curbing the problem of eutrophication introduce limitations for traditional ways to use the byproduct of anaerobic digestion-the digestate. Hydrothermal carbonisation (HTC) can be a viable way to valorise the digestate in an energy-efficient manner and at the same time maximise the synergy in terms of recovery of water, nutrients, followed by more efficient use of the remaining carbon. Addnl., hydrothermal treatment is a feasible way to recirculate recalcitrant process residues. Recirculation to anaerobic digestion enables recovery of a significant part of chem. energy lost in HTC by organics dissolved in the liquid effluent. Recirculating back to the HTC process can enhance nutrient recovery by making process water more acidic. However, such an effect of synergy can be exploited to its full extent only when viable separation techniques are applied to sep. organic byproducts of HTC and water. The results presented in this study show that using cascade membrane systems (microfiltration (MF) → ultrafiltration (UF) → nanofiltration (NF)), using polymeric membranes, can facilitate such separation The best results were obtained by conducting sequential treatment of the liquid byproduct of HTC in the following membrane sequence: MF 0.2μm → UF PES 10 → NF NPO30P, which allowed reaching COD removal efficiency of almost 60%.

From this literature《Cascade Membrane System for Separation of Water and Organics from Liquid By-Products of HTC of the Agricultural Digestate-Evaluation of Performance》,we know some information about this compound(13925-00-3)Application of 13925-00-3, but this is not all information, there are many literatures related to this compound(13925-00-3).

Reference:
Chiral Catalysts,
Chiral catalysts – SlideShare

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Acid iodides. II. The cleavage of aliphatic ethers by acid iodides》. Authors are Gustus, Edwin L.; Stevens, Philip G..The article about the compound:2-Chloroethyl acetatecas:542-58-5,SMILESS:CC(OCCCl)=O).Application of 542-58-5. Through the article, more information about this compound (cas:542-58-5) is conveyed.

When an aliphatic ether is treated with AcI, the reaction mixture becomes warm after a short induction period of often less than a min. This heat is soon dissipated. If the mixture is allowed to stand at room temperature for 2-5 days, it is found that the ether has been cleaved with the formation of an alkyl iodide and an alkyl acetate. This reaction proceeds much faster with di-sec. than with di-primary ethers. The mol. weight of primary ethers appears to influence slightly the ease with which they are cleaved. In the cleavage of unsym. aliphatic ethers, it is found that, with di-primary ethers, the greater proportion of I is attached to the smaller alkyl group. With mixed primary-sec. ethers about 0.5 of the I went to the smaller (in this case the primary) radical; in addition, rearrangement products appeared. The structure of the acid iodide in ether cleavage is almost as important as the structure of the ether itself. The introduction of Cl into the iodide has a marked effect. While thioethers are cleaved by acid iodides, the rate of cleavage is much slower than that of O ethers. Pr2O (12.25 g.) and 17 g. AcI, after 89 hrs., give 45.8% PrI, isolated as PrMe3NI and AcOPr. Details of yields are given for Me2O, Bu2O, iso-Am2O, iso-Pr2O and AcI. Et2S and AcI after 1296 hrs. still contained much unreacted AcI; the reaction products were EtI and EtSH. AcI and (CH2)2O in 20 hrs. give 73.8% of β-ICH2CH2OAc, b43 95-6°, nD20 1.5072; AcCl, after 44 days at 25°, gives about 95% of β-ClCH2CH2OAc; if a drop of concentrated HCl is added to the AcCl the reaction is completed in about 2.5 days, the yield of β-ClCH2CH2OAc being 78%; a small amount of I also catalyzes the reaction, 31% acetate being formed in 3.5 days at 25°; when equivalent amounts of AcI, (CH2)2O and I were used, the tube exploded on removal from the bath at -80°. AcCl, iso-Am2O and I remain unchanged after 44 days at 25°. Et2O and ClCH2COI, 5 days at 25°, give 91% EtI and 92% ClCH2CO2Et. Cl2CHCOI and AcI, after 6 days, give 91% of EtI and Cl2CHCO2Et. Cl3CCOI did not react with (iso-Pr)2O. MeOBu and ClCH2COI after 2 weeks give 73.2% MeI, 13.3% BuI and also ClCH2CO2Bu. Me(iso-Pr)CHOH, transformed into the K salt in p-cymene and treated with Me2SO4, gives methylisopropylcarbinol Me ether, b737 81.2-1.5°, d420 0.7586, nD20 1.3850; with ClCH2COI there results MeI (33.5%) and Me2C:CHMe. Methylisopropylcarbinol chloroacetate, b738 180-1°, d420 1.0418, nD20 1.4298. No reaction appears to take place between ClCH2COI and (ClCH2)2O after heating 6 days at 100°, or between Cl3CCOI and Et2O after 112 hrs. at room temperature or 3 hrs. at 100°, or with AcCl and Et2S after 1 week at 100°.

From this literature《Acid iodides. II. The cleavage of aliphatic ethers by acid iodides》,we know some information about this compound(542-58-5)Application of 542-58-5, but this is not all information, there are many literatures related to this compound(542-58-5).

Reference:
Chiral Catalysts,
Chiral catalysts – SlideShare

Fujii, Kiyonaga; Ikai, Yoshitomo; Mayumi, Tsuyoshi; Oka, Hisao; Suzuki, Makoto; Harada, Ken-ichi published the article 《A nonempirical method using LC/MS for determination of the absolute configuration of constituent amino acids in a peptide: elucidation of limitations of Marfey’s method and of its separation mechanism》. Keywords: absolute configuration amino acid Marfey method; fluorodinitrophenylamino acid HPLC retention absolute configuration.They researched the compound: H-Leu-NH2.HCl( cas:10466-61-2 ).Synthetic Route of C6H15ClN2O. Aromatic heterocyclic compounds can be divided into two categories: single heterocyclic and fused heterocyclic. In addition, there is a lot of other information about this compound (cas:10466-61-2) here.

As the first step in establishing the author’s proposed method, the advanced Marfey’s method, which is planned for the simultaneous determination of the absolute configuration of amino acids in a peptide, Marfey’s method was applied to com. available amino acids, and the separation behavior was examined in detail. Although good resolution of the diastereomeric pair of an individual amino acid was obtained for all amino acids tested and the applicability of the method was confirmed, the (1-fluoro-2,4-dinitrophenyl)-5-L-alaninamide (FDAA) derivative of the L-amino acid was not always eluted prior to its corresponding D-amino acid derivative Because this proposed method relies on the elution order of a derivatized amino acid with FDAA to determine its absolute configuration, its separation mechanism was carefully investigated using UV and NMR spectral techniques. The results suggested that the resulting conformations of the L- and D-amino acid derivatives are stable and that the resolution between the L- and D-amino acid derivatives is due to the difference in their hydrophobicity, which is derived from the cis- or trans-type arrangement of two more hydrophobic substituents at both α-carbons of an amino acid and L-alanine amide, so that the FDAA derivative of the cis (Z)-type arrangement interacts more strongly with ODS silica gel and has a longer retention time than that of the trans (E)-type arrangement. Therefore, the L-amino acid derivative is usually eluted from the column before its corresponding D-amino acid derivative in Marfey’s method. According to this separation mechanism, the elution order of a desired amino acid can be elucidated from the average retention time of the L- and D-amino acid derivatives, and the DL-serine and DL-asparagine derivatives are critical for Marfey’s method.

From this literature《A nonempirical method using LC/MS for determination of the absolute configuration of constituent amino acids in a peptide: elucidation of limitations of Marfey’s method and of its separation mechanism》,we know some information about this compound(10466-61-2)Synthetic Route of C6H15ClN2O, but this is not all information, there are many literatures related to this compound(10466-61-2).

Reference:
Chiral Catalysts,
Chiral catalysts – SlideShare

So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic.Gelas, Jacques; Petrequin, Danielle researched the compound: 2-Chloroethyl acetate( cas:542-58-5 ).Synthetic Route of C4H7ClO2.They published the article 《Cyclic acetals. XVII. Chlorination of the acetal function by 1,3,5-trichloro-1,3,5-triazine-2,4,6-dione》 about this compound( cas:542-58-5 ) in Carbohydrate Research. Keywords: chlorination cyclic acetal; triazinetrione trichloro acetal chlorination. We’ll tell you more about this compound (cas:542-58-5).

Action of 1,3,5-trichloro-1,3,5-triazine-2,4,6-trione in CCl4 containing iodine as catalyst, on 2-methyl-1,3-dioxolane gave 80% MeCO2CH2CH2Cl, 10% MeCO2CH2CHCl2 ∼1% ClCH2CO2CH2CH2Cl, and ∼1% Cl2CHCO2CH2Cl. Similar reaction with 2,2-dimethyl-1,3-dioxolane gave 65I, 20% II, 7% III, and 5% IV. These compounds are models for reactions with cyclic acetals of sugars.

From this literature《Cyclic acetals. XVII. Chlorination of the acetal function by 1,3,5-trichloro-1,3,5-triazine-2,4,6-dione》,we know some information about this compound(542-58-5)Synthetic Route of C4H7ClO2, but this is not all information, there are many literatures related to this compound(542-58-5).

Reference:
Chiral Catalysts,
Chiral catalysts – SlideShare

Verevkin, Sergey P.; Nagrimanov, Ruslan N.; Zaitsau, Dzmitry H.; Konnova, Maria E.; Pimerzin, Aleksey A. published an article about the compound: 2-Ethylpyrazine( cas:13925-00-3,SMILESS:CCC1=NC=CN=C1 ).Recommanded Product: 2-Ethylpyrazine. Aromatic heterocyclic compounds can be classified according to the number of heteroatoms or the size of the ring. The authors also want to convey more information about this compound (cas:13925-00-3) through the article.

This work contributes to our primary interest in applications of exptl. and computational thermochem. methods for providing the basic data required in chem.-process design. Pyrazine derivatives are considered as a seminal liquid organic hydrogen carriers. The standard molar enthalpies of vaporisation/sublimation of pyrazine derivatives were derived from the vapor pressure temperature dependences measured by the static and transpiration method. Enthalpies of fusion of the solid compounds were measured using DSC. Thermodn. data on solid-gas, liquid-gas, and solid-liquid phase transitions available in the literature were collected and combined with own exptl. results. We have evaluated and recommended the set of vaporisation and formation enthalpies of pyrazine derivatives at 298.15 K as the reliable benchmark properties for further thermochem. calculations Gas phase molar enthalpies of formation of pyrazine derivatives calculated by the high-level quantum-chem. method G4 were in agreement with the recommended exptl. data. Compilation of exptl. and theor. results derived in this work is useful for optimization of hydrogenation/dehydrogenation reactions involved in the hydrogen storage technologies.

From this literature《Thermochemical properties of pyrazine derivatives as seminal liquid organic hydrogen carriers for hydrogen storage》,we know some information about this compound(13925-00-3)Recommanded Product: 2-Ethylpyrazine, but this is not all information, there are many literatures related to this compound(13925-00-3).

Reference:
Chiral Catalysts,
Chiral catalysts – SlideShare