Tag: M.W:200-300

Name is [1,1′-Binaphthalene]-2,2′-diamine, as a common heterocyclic compound, it belongs to chiral-catalyst compound, and cas is 4488-22-6, its synthesis route is as follows.,4488-22-6

General procedure: In a typical experiment Pd(OAc)2 (5.6 mg, 0.025 mmol), triphenylphosphine (13.2 mg, 0.05 mmol), 17-iodo-5alpha-androsta-16-ene 1 (0.5 mmol), 2,2′-diamino-1,1′-binaphthalene 2 (varied from 1.0 mmol to 0.125 mmol) and triethylamine (0.5 mL) were dissolved in DMF (10 mL) under argon in a 100 mL three-necked flask equipped with a gas inlet, reflux condenser with a balloon (filled with argon) at the top. The atmosphere was changed to carbon monoxide. The reaction was conducted for the given reaction time upon stirring at 50 C and analysed by TLC. The mixture was then concentrated and evaporated to dryness. The residue was dissolved in chloroform (20 mL) and washed with water (3 20 mL), 5% hydrochloric acid (20 mL), saturated NaHCO3 (20 mL) and brine (20 mL). The organic phase was dried over Na2SO4, filtered and evaporated to give a solid material. All compounds were subjected to column chromatography (Silicagel 60 (Merck), 0.063-0.200 mm), EtOAc/CHCl3 or hexane/CHCl3 (the exact ratios are specified in Section 4.4 for each compound). 4.3. Characterisation of the products (Fig. 3) (Sax)-3: Yield: 410 mg (72%). Off-white yellow solid, mp 137-142 C; [Found: C, 84.55; H, 7.65; N, 4.70; C40H44N2O requires C,84.46; H, 7.80; N, 4.93]; Rf (5% EtOAc/CHCl3) 0.68. 1H NMR (CDCl3) delta: 8.94 (1H, d, 9.0 Hz, H-30), 8.03 (1H, d, 9.0 Hz, H-40), 7.94 (1H, d,8.2 Hz, H-50), 7.87 (1H, d, 8.5 Hz, H-300), 7.82 (1H, d, 7.5 Hz, H-400), 7.43 (1H, dt, 6.3 Hz, 1.6 Hz, H-60), 7.35 (1H, s, NH), 7.31 (1H, dt,8.5 Hz, 0.8 Hz, H-70), 7.29-7.26 (2H, m, H-600 , H-600), 7.23 (1H, dt,6.8 Hz, 1.1 Hz, H-700), 7.16 (1H, d, 8.7 Hz, H-80), 6.96 (1H, d, 8.2 Hz,H-800), 6.21 (1H, dd, 2.9 Hz, 1.5 Hz, H-16), 3.69 (2H, s, NH2), 2.05 (1H, ddd, 16.7 Hz, 6.5 Hz, 3.4 Hz, 15-CHaHb), 1.78 (1H, ddd,16.7 Hz, 11.9 Hz, 1.4 Hz, 15-CHaHb), 1.07-0.54 (23H, m, skeleton protons), 0.78 (3H, s, 19-CH3), 0.62 (3H, s, 18-CH3). 13C NMR (CDCl3) delta: 163.6, 150.4, 143.0, 140.0, 135.7, 133.8, 132.5. 131.1, 130.3, 129.3, 128.3, 128.2, 128.1, 127.5, 126.8, 125.3, 124.9, 123.6, 122.8, 120.4, 119.7, 118.1, 110.5, 56.8, 54.7, 47.2, 45.3, 38.4, 36.3, 34.2, 33.7, 31.8, 31.4, 29.0, 28.8, 26.8, 22.2, 20.5, 16.0, 12.1. IR (KBr, m(cm1)): 3440 (amide-NH), 3398 (NH2), 1665 (CON), 1620 (CC). MS m/z (rel int.): 569.4 (100, (M+H)+), 381 (9), MS/MS m/z (relint.): 551.4 (29), 285.2 (100). [alpha]D20 = 37.1 (c 1.34, CHCl3). (Rax)-3: Yield: 114 mg (20%). Off-white solid substance; [Found:C, 84.30; H, 7.66; N, 4.77; C40H44N2O requires C, 84.46; H, 7.80; N,4.93]; Rf (5% EtOAc/CHCl3) 0.72. 1H NMR (CDCl3) delta: 8.95 (1H, d,9.0 Hz, H-30), 8.03 (1H, d, 9.0 Hz, H-40), 7.93 (1H, d, 7.9 Hz, H-50), 7.87 (1H, d, 8.9 Hz, H-300), 7.82 (1H, d, 7.8 Hz, H-400), 7.43 (1H, dt,6.4 Hz, 1.2 Hz, H-60), 7.36 (1H, s, NH), 7.31 (1H, dt, 8.6 Hz, 0.8 Hz,H-70), 7.29-7.26 (2H, m, H-6”, H”), 7.23 (1H, dt, 6.9 Hz, 1.5 Hz,H-7”), 7.16 (1H, d, 8.5 Hz, H-8′), 6.96 (1H, d, 8.4 Hz, H-8”), 6.21 (1H, dd, 3.1 Hz, 1.5 Hz, H-16), 3.69 (2H, s, NH2), 2.05 (1H, ddd, 16.3 Hz, 6.4 Hz, 3.4 Hz, 15-CHaHb), 1.78 (1H, ddd, 16.6 Hz,11.7 Hz, 2.0 Hz, 15-CHaHb), 1.07-0.53 (23H, m, skeleton protons), 0.77 (3H, s, 19-CH3), 0.31 (3H, s, 18-CH3). 13C NMR (CDCl3) delta: 163.5, 150.4, 143.1, 140.2, 135.7, 133.8, 132.4, 131.1, 130.3, 129.3, 128.4, 128.3, 128.2, 127.5, 126.8, 125.3, 124.9, 123.6,122.8, 120.4, 119.7, 118.0, 110.6, 56.8, 54.8, 47.2, 45.2, 38.4, 36.3, 34.2, 33.7, 31.7, 31.4, 29.0, 28.8, 26.8, 22.2, 20.5, 15.5, 12.1. IR(KBr, m (cm1)): 3441 (amide-NH), 3396 (NH2), 1665 (CON), 1620 (CC). MS m/z (rel int.): 569.4 (100, (M+H)+), 381 (9), MS/MS m/z (rel int.): 551.4 (29), 285.2 (100). [alpha]D20 = +191.5 (c 0.914, CHCl3). (Sax)-4: Yield: 102 mg (12%). Beige solid substance; [Found: C,84.31; H, 8.35; N, 3.12; C60H72N2O2 requires C, 84.45; H, 8.51; N,3.28]; Rf (10% hexane/CHCl3) 0.69. 1H NMR (CDCl3) alpha: 8.94 (2H, d,9.2 Hz, H-3′), 8.08 (2H, d, 9.2 Hz, H-4′), 7.95 (2H, d, 8.2 Hz, H-5′),7.46 (2H, dt, 7.2 Hz, 0.9 Hz, H-6′), 7.35 (2H, dt, 7.2 Hz, 0.9 Hz, H-7′), 7.1 (2H, d, 9.3 Hz, H-8′), 7.13 (2H, s, NH), 6.05 (2H, dd, 3.1 Hz, 1.5 Hz, H-16), 2.02 (2H, ddd, 16.8 Hz, 6.4 Hz, 3.1 Hz, 15-CHaHb), 1.88 (2H, dd, 9.9 Hz, 3.1 Hz, 14-CH), 1.75 (2H, ddd, 16.8 Hz,11.7 Hz, 1.5 Hz, 15-CHaHb), 1.69-0.54 (44H, m, skeleton protons), 0.77 (6H, s, 19-CH3), 0.57 (6H, s, 18-CH3). 13C NMR (CDCl3) alpha: 163.6, 150.2, 140.0, 136.0, 135.2, 132.4, 131.3, 130.0, 128.2,127.5, 125.3, 124.9, 120.5, 118.1, 56.6, 54.8, 47.2, 45.4, 38.4, 36.3, 34.2, 33.6, 31.7, 31.4, 29.0, 28.8, 26.8, 22.1, 20.5, 16.1, 12.1. IR (KBr, m (cm1)): 3408 (amide-NH), 1677 (CON), 1621 (CC). MS m/z (rel int.): 853.6 ((M+H)+); 875.6 ((M+Na)+), 891.5 ((M+K)+). [alpha]D20 = +12.0 (c 0.418, CHCl3). (Rax)-4: Yield: 85 mg (10%). Beige solid substance; [Found: C,84.28; H, 8.30; N, 3.06; C60H72N2O2 requires C, 84.45; H, 8.51; N,3.28]; Rf (10% hexane/CHCl3) 0.74. 1H NMR (CDCl3) alpha: 8.95 (2H, d,9.0 Hz, H-3′), 8.08 (2H, d, 9.0 Hz, H-4′), 7.96 (2H, d, 7.8 Hz, H-5′), 7.46 (2H, dt, 7.8 Hz, 0.9 Hz, H-6’…

With the complex challenges of chemical substances, we look forward to future research findings about [1,1′-Binaphthalene]-2,2′-diamine

Reference£º
Article; Mikle, Gbor; Boros, Borbla; Kollr, Lszl; Tetrahedron Asymmetry; vol. 25; 23; (2014); p. 1527 – 1531;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.33100-27-5,1,4,7,10,13-Pentaoxacyclopentadecane,as a common compound, the synthetic route is as follows.

EXAMPLE 1 A mixture of 4-hydroxy-4-[3-(naphth-2-ylmethoxy)phenyl]-tetrahydropyran (1.9 g), sodium hydride (0.27 g of a 50percent w/w dispersion in mineral oil), 1,4,7,10,13-pentaoxacyclopentadecane (hereinafter 15-crown-5, 0.2 g) and tetrahydrofuran (10 ml) was stirred at ambient temperature for 15 minutes. Methyl iodide (0.35 ml) was added and the mixture was stirred at ambient temperature for 15 hours. The mixture was evaporated and the residue was partitioned between diethyl ether and water. The organic layer was separated, washed with a saturated aqueous sodium chloride solution, dried (MgSO4) and evaporated. The residue was purified by column chromatography using a 9:1 v/v mixture of methylene chloride and diethyl ether as eluent. There was thus obtained 4-methoxy-4-[3-(naphth-2-ylmethoxy)phenyl]tetrahydropyran (1.8 g, 94percent), m.p. 66.5¡ã-67.5¡ã C. The 4-hydroxy-4-[3-(naphth-2-ylmethoxy)phenyl]tetrahydropyran starting material was obtained as follows:, 33100-27-5

The synthetic route of 33100-27-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Imperial Chemical Industries PLC; ICI Pharma; US5098930; (1992); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

As a common heterocyclic compound, it belongs to chiral-catalyst compound, name is [1,1′-Binaphthalene]-2,2′-diamine, and cas is 4488-22-6, its synthesis route is as follows.,4488-22-6

General procedure: To a two-necked round-bottomed flask (50 mL) equipped with a magnetic stir bar, was added biaryldiamine 1 (or 3) (0.1 mmol) under the air. The flask was capped with a rubber septum, evacuated, and refilled with N2 gas for three times. Solvent (10 mL) and 2,6-lutidine (23.5 mg, 0.22 mmol or none) were added to the tube through the septum. To the mixture, was added t-BuOCl (23.8 mg, 0.22 mmol or 43.4 mg, 0.40 mmol) through the septum at the indicated temperature. The resulting solution was stirred for the indicated time (Table 2 in the text) before quenched with aqueous Na2S2O3 solution (1.0 M, 20 mL), and the resulting mixture was extracted with CH2Cl2 (20 mL ¡Á 3). The combined organic extracts were dried over Na2SO4 and concentrated under vacuum to give the crude product. Purification by flash column chromatography on silica gel gave the corresponding 7,8-diaza[5]helicene (for example, compound 2a: 27.2 mg, 97%).

With the complex challenges of chemical substances, we look forward to future research findings about 4488-22-6,belong chiral-catalyst compound

Reference£º
Article; Takeda, Youhei; Okazaki, Masato; Maruoka, Yoshiaki; Minakata, Satoshi; Beilstein Journal of Organic Chemistry; vol. 11; (2015); p. 9 – 15;,
Chiral Catalysts
Chiral catalysts – SlideShare

It is a common heterocyclic compound, the chiral-catalyst compound, [1,1′-Binaphthalene]-2,2′-diamine, cas is 4488-22-6 its synthesis route is as follows.

The mixture of BINAM (227.2 mg, 0.8 mmol), BoC-D-proline (222.9 mg, 0.73 mmol), EDCI (95.8 mg, 1.45 mmol) and HOBt (196 mg, 1.45 mmol) in DCM (20 mL) was tirred at room temperature for 5 h. The mixture was washed by water (25 mL ¡Á 3), dried (MgSO4) and concentrated. The residue was purified by column chromatography on silica gel using PE-EtOAc as the eluent, to give tert-butyl2-((2′-amino-[1,1′-binaphthalen]-2-yl)carbamoyl)pyrrolidine-1-carboxylate; yield: 202 mg (54%). Then 1.5 ml TFA and 1.5 ml Et3SiH were added to the prepared tert-butyl2-((2′-amino-[1,1′-binaphthalen]-2-yl)carbamoyl)pyrrolidine-1-carboxylate in DCM (2.0 mL) , after stirred for 2 h the residue was added NaOH to adjust pH>7 AND extracted by DCM, then the residue was concentrated and purified by column chromatography on silica gel using PE-EtOAc as the eluent, to give A-4; yield: 121 mg (73%);

4488-22-6, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,4488-22-6 ,[1,1′-Binaphthalene]-2,2′-diamine, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Zhang, Yu; Mao, Mao; Ji, Yi-Gang; Zhu, Jie; Wu, Lei; Tetrahedron Letters; vol. 57; 3; (2016); p. 329 – 332;,
Chiral Catalysts
Chiral catalysts – SlideShare

As a common heterocyclic compound, it belongs to chiral-catalyst compound, name is (1R,2S)-2-Amino-1,2-diphenylethanol, and cas is 23190-16-1, its synthesis route is as follows.

To a 5 L round bottom flask equipped with an overhead stirrer, thermocouple and distillation head, was charged 550 g (2.579 mol) of (1 R,2S)- diphenyl-2-aminoethanol, 457 g (3.868 mol, 1.5eq) of diethylcarbonate, 18 g (0.258 mol, 0.1 eq) of NaOEt in 100 mL of EtOH and 3.5 L of toluene. The reaction was heated until an internal temperature of 90C was reached and EtOH distillation began. The reaction was refluxed until an internal temperature of 110C was reached (7 hours). For every 500 mL of solvent that was removed via the distillation head, 500 mL of toluene was added back to the reaction. A total of about 1.6 L of solvent was removed. The reaction was allowed to cool to room temperature and then filtered on a 3 L coarse fritted funnel with 2 psig N2. Nitrogen was blown over the cake overnight (at)o give 580 g (94% yield) of the titled nom””””” ””d” 9,-..C.U.(at), l:(at)VQ”; ‘I <"Q'.(at)(at) Up(at),.,; ',r1" (at)'(at) (at) (at).(at).(at) (at)-77 1'Cf'; 41i), ..(at)(at) ^(at)''1 I or(at)r(at)1 (at),f3rr:.(at)i ....u..(at) " ' (at).V.(at)_7(at)dli (at) ",-JVV Jc;;;J7Jv (at)L.-, U- -(at)t 'H'o(at)(at)-:J """.v (at)' "(at)(at) fUSD5 -/: q,78V;",j (at)(at)-j -(at), t(at).3J(at):, (at):_/(at).:::: , OJ (at), :=: ?Q(at)':::'::' 23190-16-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,23190-16-1 ,(1R,2S)-2-Amino-1,2-diphenylethanol, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; PFIZER PRODUCTS INC.; WO2005/102389; (2005); A2;,
Chiral Catalysts
Chiral catalysts – SlideShare

23190-16-1, (1R,2S)-2-Amino-1,2-diphenylethanol is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of (Boc)2O (44 mmol) in THF (50ml) was added to the mixture of the amino alcohol (40 mmol) and sodium carbonate (80 mmol) in THF/H2O (1/1, 300 ml) at O0C. The mixture was stirred at O0C for Ih and then at room temperature for another two 2h (TLC was used to monitor the reactions). Water (200 ml) was added to the mixture upon completion. The organic layer was separated and the aqueous layer was extracted with ethyl acetate (200 ml). The combined organic layers was washed with brine (300 ml) and dried with anhydrous MgSO4 for Ih. It was then filtered and the solvent was removed under vacuum to give the product (yield = 90 – 99 %). It was sufficiently pure for the next step. The pure product was obtained by recrystallization from the THF and hexane, or by purification with silica gel chromatography.Example 2.1: Tert-butyl (lS,2R)-2-hydroxy-l,2-diphenylethylcarbamatePh PhBocHN OHYield: 90 %. 1H NMR (CD2Cl2): delta 7.25-7.27 (m, 6H), 7.08-7.1 1 (m, 4H), 5.33 (m, IH), 5.04 (m, IH), 4.92 (b, IH), 2.60 (b, IH), 1.38 (s, 9H).

23190-16-1, 23190-16-1 (1R,2S)-2-Amino-1,2-diphenylethanol 719819, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; KANATA CHEMICAL TECHNOLOGIES INC.; WO2008/148202; (2008); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4488-22-6,[1,1′-Binaphthalene]-2,2′-diamine,as a common compound, the synthetic route is as follows.

General procedure: In a typical experiment Pd(OAc)2 (5.6 mg, 0.025 mmol), triphenylphosphine (13.2 mg, 0.05 mmol), 17-iodo-5alpha-androsta-16-ene 1 (0.5 mmol), 2,2′-diamino-1,1′-binaphthalene 2 (varied from 1.0 mmol to 0.125 mmol) and triethylamine (0.5 mL) were dissolved in DMF (10 mL) under argon in a 100 mL three-necked flask equipped with a gas inlet, reflux condenser with a balloon (filled with argon) at the top. The atmosphere was changed to carbon monoxide. The reaction was conducted for the given reaction time upon stirring at 50 C and analysed by TLC. The mixture was then concentrated and evaporated to dryness. The residue was dissolved in chloroform (20 mL) and washed with water (3 20 mL), 5% hydrochloric acid (20 mL), saturated NaHCO3 (20 mL) and brine (20 mL). The organic phase was dried over Na2SO4, filtered and evaporated to give a solid material. All compounds were subjected to column chromatography (Silicagel 60 (Merck), 0.063-0.200 mm), EtOAc/CHCl3 or hexane/CHCl3 (the exact ratios are specified in Section 4.4 for each compound). 4.3. Characterisation of the products (Fig. 3) (Sax)-3: Yield: 410 mg (72%). Off-white yellow solid, mp 137-142 C; [Found: C, 84.55; H, 7.65; N, 4.70; C40H44N2O requires C,84.46; H, 7.80; N, 4.93]; Rf (5% EtOAc/CHCl3) 0.68. 1H NMR (CDCl3) delta: 8.94 (1H, d, 9.0 Hz, H-30), 8.03 (1H, d, 9.0 Hz, H-40), 7.94 (1H, d,8.2 Hz, H-50), 7.87 (1H, d, 8.5 Hz, H-300), 7.82 (1H, d, 7.5 Hz, H-400), 7.43 (1H, dt, 6.3 Hz, 1.6 Hz, H-60), 7.35 (1H, s, NH), 7.31 (1H, dt,8.5 Hz, 0.8 Hz, H-70), 7.29-7.26 (2H, m, H-600 , H-600), 7.23 (1H, dt,6.8 Hz, 1.1 Hz, H-700), 7.16 (1H, d, 8.7 Hz, H-80), 6.96 (1H, d, 8.2 Hz,H-800), 6.21 (1H, dd, 2.9 Hz, 1.5 Hz, H-16), 3.69 (2H, s, NH2), 2.05 (1H, ddd, 16.7 Hz, 6.5 Hz, 3.4 Hz, 15-CHaHb), 1.78 (1H, ddd,16.7 Hz, 11.9 Hz, 1.4 Hz, 15-CHaHb), 1.07-0.54 (23H, m, skeleton protons), 0.78 (3H, s, 19-CH3), 0.62 (3H, s, 18-CH3). 13C NMR (CDCl3) delta: 163.6, 150.4, 143.0, 140.0, 135.7, 133.8, 132.5. 131.1, 130.3, 129.3, 128.3, 128.2, 128.1, 127.5, 126.8, 125.3, 124.9, 123.6, 122.8, 120.4, 119.7, 118.1, 110.5, 56.8, 54.7, 47.2, 45.3, 38.4, 36.3, 34.2, 33.7, 31.8, 31.4, 29.0, 28.8, 26.8, 22.2, 20.5, 16.0, 12.1. IR (KBr, m(cm1)): 3440 (amide-NH), 3398 (NH2), 1665 (CON), 1620 (CC). MS m/z (rel int.): 569.4 (100, (M+H)+), 381 (9), MS/MS m/z (relint.): 551.4 (29), 285.2 (100). [alpha]D20 = 37.1 (c 1.34, CHCl3). (Rax)-3: Yield: 114 mg (20%). Off-white solid substance; [Found:C, 84.30; H, 7.66; N, 4.77; C40H44N2O requires C, 84.46; H, 7.80; N,4.93]; Rf (5% EtOAc/CHCl3) 0.72. 1H NMR (CDCl3) delta: 8.95 (1H, d,9.0 Hz, H-30), 8.03 (1H, d, 9.0 Hz, H-40), 7.93 (1H, d, 7.9 Hz, H-50), 7.87 (1H, d, 8.9 Hz, H-300), 7.82 (1H, d, 7.8 Hz, H-400), 7.43 (1H, dt,6.4 Hz, 1.2 Hz, H-60), 7.36 (1H, s, NH), 7.31 (1H, dt, 8.6 Hz, 0.8 Hz,H-70), 7.29-7.26 (2H, m, H-6”, H”), 7.23 (1H, dt, 6.9 Hz, 1.5 Hz,H-7”), 7.16 (1H, d, 8.5 Hz, H-8′), 6.96 (1H, d, 8.4 Hz, H-8”), 6.21 (1H, dd, 3.1 Hz, 1.5 Hz, H-16), 3.69 (2H, s, NH2), 2.05 (1H, ddd, 16.3 Hz, 6.4 Hz, 3.4 Hz, 15-CHaHb), 1.78 (1H, ddd, 16.6 Hz,11.7 Hz, 2.0 Hz, 15-CHaHb), 1.07-0.53 (23H, m, skeleton protons), 0.77 (3H, s, 19-CH3), 0.31 (3H, s, 18-CH3). 13C NMR (CDCl3) delta: 163.5, 150.4, 143.1, 140.2, 135.7, 133.8, 132.4, 131.1, 130.3, 129.3, 128.4, 128.3, 128.2, 127.5, 126.8, 125.3, 124.9, 123.6,122.8, 120.4, 119.7, 118.0, 110.6, 56.8, 54.8, 47.2, 45.2, 38.4, 36.3, 34.2, 33.7, 31.7, 31.4, 29.0, 28.8, 26.8, 22.2, 20.5, 15.5, 12.1. IR(KBr, m (cm1)): 3441 (amide-NH), 3396 (NH2), 1665 (CON), 1620 (CC). MS m/z (rel int.): 569.4 (100, (M+H)+), 381 (9), MS/MS m/z (rel int.): 551.4 (29), 285.2 (100). [alpha]D20 = +191.5 (c 0.914, CHCl3). (Sax)-4: Yield: 102 mg (12%). Beige solid substance; [Found: C,84.31; H, 8.35; N, 3.12; C60H72N2O2 requires C, 84.45; H, 8.51; N,3.28]; Rf (10% hexane/CHCl3) 0.69. 1H NMR (CDCl3) alpha: 8.94 (2H, d,9.2 Hz, H-3′), 8.08 (2H, d, 9.2 Hz, H-4′), 7.95 (2H, d, 8.2 Hz, H-5′),7.46 (2H, dt, 7.2 Hz, 0.9 Hz, H-6′), 7.35 (2H, dt, 7.2 Hz, 0.9 Hz, H-7′), 7.1 (2H, d, 9.3 Hz, H-8′), 7.13 (2H, s, NH), 6.05 (2H, dd, 3.1 Hz, 1.5 Hz, H-16), 2.02 (2H, ddd, 16.8 Hz, 6.4 Hz, 3.1 Hz, 15-CHaHb), 1.88 (2H, dd, 9.9 Hz, 3.1 Hz, 14-CH), 1.75 (2H, ddd, 16.8 Hz,11.7 Hz, 1.5 Hz, 15-CHaHb), 1.69-0.54 (44H, m, skeleton protons), 0.77 (6H, s, 19-CH3), 0.57 (6H, s, 18-CH3). 13C NMR (CDCl3) alpha: 163.6, 150.2, 140.0, 136.0, 135.2, 132.4, 131.3, 130.0, 128.2,127.5, 125.3, 124.9, 120.5, 118.1, 56.6, 54.8, 47.2, 45.4, 38.4, 36.3, 34.2, 33.6, 31.7, 31.4, 29.0, 28.8, 26.8, 22.1, 20.5, 16.1, 12.1. IR (KBr, m (cm1)): 3408 (amide-NH), 1677 (CON), 1621 (CC). MS m/z (rel int.): 853.6 ((M+H)+); 875.6 ((M+Na)+), 891.5 ((M+K)+). [alpha]D20 = +12.0 (c 0.418, CHCl3). (Rax)-4: Yield: 85 mg (10%). Beige solid substance; [Found: C,84.28; H, 8.30; N, 3.06; C60H72N2O2 requires C, 84.45; H, 8.51; N,3.28]; Rf (10% hexane/CHCl3) 0.74. 1H NMR (CDCl3) alpha: 8.95 (2H, d,9.0 Hz, H-3′), 8.08 (2H, d, 9.0 Hz, H-4′), 7.96 (2H, d, 7.8 Hz, H-5′), 7.46 (2H, dt, 7.8 Hz, 0.9 Hz, H-6’…

4488-22-6, As the paragraph descriping shows that 4488-22-6 is playing an increasingly important role.

Reference£º
Article; Mikle, Gbor; Boros, Borbla; Kollr, Lszl; Tetrahedron Asymmetry; vol. 25; 23; (2014); p. 1527 – 1531;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4488-22-6,[1,1′-Binaphthalene]-2,2′-diamine,as a common compound, the synthetic route is as follows.

General procedure: To a two-necked round-bottomed flask (50 mL) equipped with a magnetic stir bar, was added biaryldiamine 1 (or 3) (0.1 mmol) under the air. The flask was capped with a rubber septum, evacuated, and refilled with N2 gas for three times. Solvent (10 mL) and 2,6-lutidine (23.5 mg, 0.22 mmol or none) were added to the tube through the septum. To the mixture, was added t-BuOCl (23.8 mg, 0.22 mmol or 43.4 mg, 0.40 mmol) through the septum at the indicated temperature. The resulting solution was stirred for the indicated time (Table 2 in the text) before quenched with aqueous Na2S2O3 solution (1.0 M, 20 mL), and the resulting mixture was extracted with CH2Cl2 (20 mL ¡Á 3). The combined organic extracts were dried over Na2SO4 and concentrated under vacuum to give the crude product. Purification by flash column chromatography on silica gel gave the corresponding 7,8-diaza[5]helicene (for example, compound 2a: 27.2 mg, 97%).

4488-22-6, The synthetic route of 4488-22-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Takeda, Youhei; Okazaki, Masato; Maruoka, Yoshiaki; Minakata, Satoshi; Beilstein Journal of Organic Chemistry; vol. 11; (2015); p. 9 – 15;,
Chiral Catalysts
Chiral catalysts – SlideShare

602-09-5, [1,1′-Binaphthalene]-2,2′-diol is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of 5.73 g (20 mmol) of (1,1′-binaphthyl) -2,2′-diol and 4.10 g (20 mmol) of p-TsOH were dissolved in 150 mL of toluene,The solution was stirred at 100 & lt; 0 & gt; C for 12 hours.The reaction solution was cooled to room temperature,Adding a potassium carbonate solution thereto,The organic layer was extracted three times by using 60 mL of ethyl acetate.The organic layer thus collected was dried with magnesium sulfate,The residue obtained after the solvent was evaporated from the silica gel column chromatography was used to separate and purify the residue,To obtain 3.76 g of intermediate I-1 (yield: 70%).The compounds thus produced were determined by using liquid chromatography-mass spectrometry (LC-MS)., 602-09-5

As the paragraph descriping shows that 602-09-5 is playing an increasingly important role.

Reference£º
Patent; Sanxing Display Co., Ltd.; Shen Wenji; Li Yinyong; Jin Rongguo; Po Junhe; Li Xiaorong; Zheng Enzai; Huang Xihuan; Jin Meigeng; Liang Chengjue; (89 pag.)CN106565689; (2017); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

Name is [1,1′-Binaphthalene]-2,2′-diamine, as a common heterocyclic compound, it belongs to chiral-catalyst compound, and cas is 4488-22-6, its synthesis route is as follows.,4488-22-6

To a solution of 1,1?binaphthyl-2,2?-diamine 2 (569 mg, 2 mmol) in THF (30 mL) was added solid Na2CO3 (212 mg, 2 mmol) followed by dropwise addition of TFAA (1.27 mL, 9 mmol) in THF (30 mL). After 2 h the reaction was quenched with sat. NaHCO3 solution an

With the complex challenges of chemical substances, we look forward to future research findings about [1,1′-Binaphthalene]-2,2′-diamine