Tag: M.W:200-300

602-09-5, [1,1′-Binaphthalene]-2,2′-diol is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

In a 3000 mL four-necked flask, 343.2 g (1.2 mol) of (¡À)-1,1′-bi(2-naphthol), 600 g of toluene, 48 g of N,N-dimethylacetamide, 22.8 g of potassium carbonate and 704 g (3 mol) of ethylene carbonate. After 6 hours of reaction at 100 C, The content of (¡À) -2,2′-bis- (2-hydroxyethoxy) -1,1′-binaphthalene was less than 0.1% by HPLC analysis, and the reaction was stopped. Toluene was added, washed with water to neutrality, and the solid was precipitated by cooling, and put into a 1000 mL oven with spiral stirring. Toluene was added, washed with water to neutrality, and the solid was precipitated by cooling, and put into a 1000 mL oven with spiral stirring. Grinding the dried under vacuum, drying temperature 85 , drying time of 18 hours, to give (¡À) -2,2′- two – (2-hydroxyethoxy) -1,1′-binaphthyl 391.73g, yield 87.19%., 602-09-5

As the paragraph descriping shows that 602-09-5 is playing an increasingly important role.

Reference£º
Patent; Jiangsu Yong Xing Chemical Co., Ltd.; Xu Weihua; Zhao Jinlong; Lu Guoyuan; Zhang Qiang; (15 pag.)CN110483259; (2019); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

602-09-5, [1,1′-Binaphthalene]-2,2′-diol is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

20.0 g (69.93 mol) of the starting material SM-0 was dissolved in 300 ml of anhydrous dichloromethane, 27.5 g (0.35 mol) of pyridine and 1.5 g of DMAP were added, 43.4 g (0.15 mol) of a solution of trifluoromethanesulfonic anhydride dissolved in dichloromethane was slowly added dropwise, the reaction was stirred at room temperature for 8 hours, and stirred with 300 ml of water for 30 minutes, the organic phase was collected, concentrated, dried, and purified using silica gel column, concentrated and dried under reduced pressure to obtain 36.5 g of a white solid in a yield of 95% ., 602-09-5

602-09-5 [1,1′-Binaphthalene]-2,2′-diol 762831, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; Shijiazhuang Cheng Zhiyonghua Display Materials Co., Ltd.; Cao Jianhua; Wang Shibo; Dong Liang; Zhang Jianchuan; Sui Yan; Tang Yongshun; (39 pag.)CN108623430; (2018); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

A common heterocyclic compound, the chiral-catalyst compound, name is [1,1′-Binaphthalene]-2,2′-diamine,cas is 4488-22-6, mainly used in chemical industry, its synthesis route is as follows.,4488-22-6

To a solution of 2 (1.421 g, 5 mmol) in benzene (5 mL) was added allylalcohol (0.850 mL, 12.5 mmol) and dried molsieve (1 g, 4 A) and the mixture was degassed. Subsequently, Ti(i-OPr)4, (710 mg, 740 muL, 2.5 mmol), PPh3 (105 mg, 0.4 mmol), and Pd(OAc)2 (22.5 mg, 0.1 mmol) was added and the reaction was stirred under Ar at 50 C. The conversion was monitored by TLC. After extractive work-up with DCM/water, drying (MgSO4), and evaporation, the crude product was purified by chromatography in EtOAc (5?20%)/heptane to afford 1.55 g (85%) of 6 as a slightly brown crystaline solid; m.p.: 95-99 C. 1H-NMR delta = 7.87 (d, J = 9.0 Hz, 2H); 7.78 (dm, J = 7.7 Hz, 2H); 7.21 (d, J = 9.1 Hz, 2H); 7.14-7.22 (m, 4H); 6.99 (dm, J = 7.9 Hz, 2H); 5.77 (ddm, J = 17.3, 10.3 Hz, 2H); 5.12 (dm, J = 17.3 Hz, 2H); 5.02 (dm, J = 10.3 Hz, 2H); 3.92 (br.s, 2H); 3.77-3.86 (br.m, 4H). 13C-NMR delta = 144.2 (C); 135.7 (CH); 133.9 (C); 129.5 (CH); 128.1 (CH); 127.7 (C); 126.7 (CH); 123.9 (CH); 122.0 (CH); 115.6 (CH2); 114.2 (CH); 112.0 (C); 46.1 (CH2). HRMS calcd for C26H25N2 [M + H]+: 365.2018; found: 365.2011.

As the rapid development of chemical substances, we look forward to future research findings about 4488-22-6

Reference£º
Article; Lemmerer, Miran; Abraham, Michael; Brutiu, Bogdan R.; Roller, Alexander; Widhalm, Michael; Molecules; vol. 24; 17; (2019);,
Chiral Catalysts
Chiral catalysts – SlideShare

A common heterocyclic compound, the chiral-catalyst compound, name is (1R,2S)-2-Amino-1,2-diphenylethanol,cas is 23190-16-1, mainly used in chemical industry, its synthesis route is as follows.,23190-16-1

To a 5 L round bottom flask equipped with an overhead stirrer, thermocouple and distillation head, was charged 550 g (2.579 mol) of (lR, 2S) -diphenyl-2-aminoethanol, 457 g (3.868 mol, 1. 5eq) of diethylcarbonate, 18 g (0.258 mol, O. leq) of NaOEt in 100 mL of EtOH and 3.5 L of toluene. The reaction was heated until an internal temperature of 90C was reached and EtOH distillation began. The reaction was refluxed until an internal temperature of 110 DC was reached (7 hours). For every 500 mL of solvent that was removed via the distillation head, 500 mL of toluene was added back to the reaction. A total of about 1.6 L of solvent was removed. The reaction was allowed to cool to room temperature and then filtered on a 3 L coarse fritted funnel with 2 psig N2. Nitrogen was blown over the cake overnight to give 580 g (94% yield) of the titled compound : 1H NMR (DMSO) 7.090-6. 985 (m, 6H), 6.930-6. 877 (m, 4H), 5.900 (d, 1H, J = 8.301), 5.206 (d, 1H, J = 8.301).

As the rapid development of chemical substances, we look forward to future research findings about 23190-16-1

Reference£º
Patent; PFIZER LIMITED; PFIZER INC.; WO2005/92318; (2005); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.602-09-5,[1,1′-Binaphthalene]-2,2′-diol,as a common compound, the synthetic route is as follows.

Stirrer, condenser, and a glass reactor equipped with a thermometer, (RS) -1,1′- bi -2-naphthol 180g (0.629mol), ethylene carbonate 127g (1.439mol), was charged with potassium carbonate 9.0g and toluene 180g, 10 at 110 It was stirred time. The mother liquor 110 obtained in toluene 200g and Production Example 1 in the reaction productAfter the addition of 0g, the organic solvent layer kept at 80 , and washed with sodium hydroxide aqueous solution. SubsequentlyThe organic solvent layer, wash water was washed with water until neutral. Dee and the resulting organic solvent layerTo obtain a dehydrated crystallization solution under reflux using a Nsutaku equipment, cold in such a way that 30 after 8 hoursTo precipitate a crystal at 39 by retirement. Thus obtained slurry solution of the above-mentioned conditionsIn After filtration, further wash the crystal with toluene 200g,It was separated into the crystal section and the mother liquor . ThisIt took 10 minutes to filtration and washing operation . Also , it was analyzed to collect part of the resulting crystals , sinteredSolvent content of Akirachu is 15 wt % , the shape of the crystals was plate- shaped crystals . It is separated by filtrationThe mother liquor was 1603g. Then , drying the crystals obtained by the filtration operation (RS) -2,2′- Bis ( 2-hydroxyethoxy ) -1,1′- binaphthalene of white crystals 2Was obtained 11g (89.5% yield , HPLC purity 99.7%, YI value : 4 ) . The obtained crystalsThe physical properties as follows [DSC melting endotherm maximum : 107 , powder X-ray diffraction pattern : polymorph C,Crystal shape : plate-like crystal , aspect ratio : 1.3 (absolute value of the width : 70mum), mode diameter and jointThe ratio of the Anne diameter (Dmode / Dmedian): 1.0]., 602-09-5

602-09-5 [1,1′-Binaphthalene]-2,2′-diol 762831, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; Taoka Chemical Co., Ltd.; MATSUURA, TAKASHI; KAWAMURA, MIO; HIRABAYASHI, SHUNICHI; FUJII, KATSUHIRO; (23 pag.)JP2015/187098; (2015); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

4488-22-6, [1,1′-Binaphthalene]-2,2′-diamine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: In a typical experiment Pd(OAc)2 (5.6 mg, 0.025 mmol), triphenylphosphine (13.2 mg, 0.05 mmol), 17-iodo-5alpha-androsta-16-ene 1 (0.5 mmol), 2,2′-diamino-1,1′-binaphthalene 2 (varied from 1.0 mmol to 0.125 mmol) and triethylamine (0.5 mL) were dissolved in DMF (10 mL) under argon in a 100 mL three-necked flask equipped with a gas inlet, reflux condenser with a balloon (filled with argon) at the top. The atmosphere was changed to carbon monoxide. The reaction was conducted for the given reaction time upon stirring at 50 C and analysed by TLC. The mixture was then concentrated and evaporated to dryness. The residue was dissolved in chloroform (20 mL) and washed with water (3 20 mL), 5% hydrochloric acid (20 mL), saturated NaHCO3 (20 mL) and brine (20 mL). The organic phase was dried over Na2SO4, filtered and evaporated to give a solid material. All compounds were subjected to column chromatography (Silicagel 60 (Merck), 0.063-0.200 mm), EtOAc/CHCl3 or hexane/CHCl3 (the exact ratios are specified in Section 4.4 for each compound). 4.3. Characterisation of the products (Fig. 3) (Sax)-3: Yield: 410 mg (72%). Off-white yellow solid, mp 137-142 C; [Found: C, 84.55; H, 7.65; N, 4.70; C40H44N2O requires C,84.46; H, 7.80; N, 4.93]; Rf (5% EtOAc/CHCl3) 0.68. 1H NMR (CDCl3) delta: 8.94 (1H, d, 9.0 Hz, H-30), 8.03 (1H, d, 9.0 Hz, H-40), 7.94 (1H, d,8.2 Hz, H-50), 7.87 (1H, d, 8.5 Hz, H-300), 7.82 (1H, d, 7.5 Hz, H-400), 7.43 (1H, dt, 6.3 Hz, 1.6 Hz, H-60), 7.35 (1H, s, NH), 7.31 (1H, dt,8.5 Hz, 0.8 Hz, H-70), 7.29-7.26 (2H, m, H-600 , H-600), 7.23 (1H, dt,6.8 Hz, 1.1 Hz, H-700), 7.16 (1H, d, 8.7 Hz, H-80), 6.96 (1H, d, 8.2 Hz,H-800), 6.21 (1H, dd, 2.9 Hz, 1.5 Hz, H-16), 3.69 (2H, s, NH2), 2.05 (1H, ddd, 16.7 Hz, 6.5 Hz, 3.4 Hz, 15-CHaHb), 1.78 (1H, ddd,16.7 Hz, 11.9 Hz, 1.4 Hz, 15-CHaHb), 1.07-0.54 (23H, m, skeleton protons), 0.78 (3H, s, 19-CH3), 0.62 (3H, s, 18-CH3). 13C NMR (CDCl3) delta: 163.6, 150.4, 143.0, 140.0, 135.7, 133.8, 132.5. 131.1, 130.3, 129.3, 128.3, 128.2, 128.1, 127.5, 126.8, 125.3, 124.9, 123.6, 122.8, 120.4, 119.7, 118.1, 110.5, 56.8, 54.7, 47.2, 45.3, 38.4, 36.3, 34.2, 33.7, 31.8, 31.4, 29.0, 28.8, 26.8, 22.2, 20.5, 16.0, 12.1. IR (KBr, m(cm1)): 3440 (amide-NH), 3398 (NH2), 1665 (CON), 1620 (CC). MS m/z (rel int.): 569.4 (100, (M+H)+), 381 (9), MS/MS m/z (relint.): 551.4 (29), 285.2 (100). [alpha]D20 = 37.1 (c 1.34, CHCl3). (Rax)-3: Yield: 114 mg (20%). Off-white solid substance; [Found:C, 84.30; H, 7.66; N, 4.77; C40H44N2O requires C, 84.46; H, 7.80; N,4.93]; Rf (5% EtOAc/CHCl3) 0.72. 1H NMR (CDCl3) delta: 8.95 (1H, d,9.0 Hz, H-30), 8.03 (1H, d, 9.0 Hz, H-40), 7.93 (1H, d, 7.9 Hz, H-50), 7.87 (1H, d, 8.9 Hz, H-300), 7.82 (1H, d, 7.8 Hz, H-400), 7.43 (1H, dt,6.4 Hz, 1.2 Hz, H-60), 7.36 (1H, s, NH), 7.31 (1H, dt, 8.6 Hz, 0.8 Hz,H-70), 7.29-7.26 (2H, m, H-6”, H”), 7.23 (1H, dt, 6.9 Hz, 1.5 Hz,H-7”), 7.16 (1H, d, 8.5 Hz, H-8′), 6.96 (1H, d, 8.4 Hz, H-8”), 6.21 (1H, dd, 3.1 Hz, 1.5 Hz, H-16), 3.69 (2H, s, NH2), 2.05 (1H, ddd, 16.3 Hz, 6.4 Hz, 3.4 Hz, 15-CHaHb), 1.78 (1H, ddd, 16.6 Hz,11.7 Hz, 2.0 Hz, 15-CHaHb), 1.07-0.53 (23H, m, skeleton protons), 0.77 (3H, s, 19-CH3), 0.31 (3H, s, 18-CH3). 13C NMR (CDCl3) delta: 163.5, 150.4, 143.1, 140.2, 135.7, 133.8, 132.4, 131.1, 130.3, 129.3, 128.4, 128.3, 128.2, 127.5, 126.8, 125.3, 124.9, 123.6,122.8, 120.4, 119.7, 118.0, 110.6, 56.8, 54.8, 47.2, 45.2, 38.4, 36.3, 34.2, 33.7, 31.7, 31.4, 29.0, 28.8, 26.8, 22.2, 20.5, 15.5, 12.1. IR(KBr, m (cm1)): 3441 (amide-NH), 3396 (NH2), 1665 (CON), 1620 (CC). MS m/z (rel int.): 569.4 (100, (M+H)+), 381 (9), MS/MS m/z (rel int.): 551.4 (29), 285.2 (100). [alpha]D20 = +191.5 (c 0.914, CHCl3). (Sax)-4: Yield: 102 mg (12%). Beige solid substance; [Found: C,84.31; H, 8.35; N, 3.12; C60H72N2O2 requires C, 84.45; H, 8.51; N,3.28]; Rf (10% hexane/CHCl3) 0.69. 1H NMR (CDCl3) alpha: 8.94 (2H, d,9.2 Hz, H-3′), 8.08 (2H, d, 9.2 Hz, H-4′), 7.95 (2H, d, 8.2 Hz, H-5′),7.46 (2H, dt, 7.2 Hz, 0.9 Hz, H-6′), 7.35 (2H, dt, 7.2 Hz, 0.9 Hz, H-7′), 7.1 (2H, d, 9.3 Hz, H-8′), 7.13 (2H, s, NH), 6.05 (2H, dd, 3.1 Hz, 1.5 Hz, H-16), 2.02 (2H, ddd, 16.8 Hz, 6.4 Hz, 3.1 Hz, 15-CHaHb), 1.88 (2H, dd, 9.9 Hz, 3.1 Hz, 14-CH), 1.75 (2H, ddd, 16.8 Hz,11.7 Hz, 1.5 Hz, 15-CHaHb), 1.69-0.54 (44H, m, skeleton protons), 0.77 (6H, s, 19-CH3), 0.57 (6H, s, 18-CH3). 13C NMR (CDCl3) alpha: 163.6, 150.2, 140.0, 136.0, 135.2, 132.4, 131.3, 130.0, 128.2,127.5, 125.3, 124.9, 120.5, 118.1, 56.6, 54.8, 47.2, 45.4, 38.4, 36.3, 34.2, 33.6, 31.7, 31.4, 29.0, 28.8, 26.8, 22.1, 20.5, 16.1, 12.1. IR (KBr, m (cm1)): 3408 (amide-NH), 1677 (CON), 1621 (CC). MS m/z (rel int.): 853.6 ((M+H)+); 875.6 ((M+Na)+), 891.5 ((M+K)+). [alpha]D20 = +12.0 (c 0.418, CHCl3). (Rax)-4: Yield: 85 mg (10%). Beige solid substance; [Found: C,84.28; H, 8.30; N, 3.06; C60H72N2O2 requires C, 84.45; H, 8.51; N,3.28]; Rf (10% hexane/CHCl3) 0.74. 1H NMR (CDCl3) alpha: 8.95 (2H, d,9.0 Hz, H-3′), 8.08 (2H, d, 9.0 Hz, H-4′), 7.96 (2H, d, 7.8 Hz, H-5′), 7.46 (2H, dt, 7.8 Hz, 0.9 Hz, H-6’…, 4488-22-6

The synthetic route of 4488-22-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Mikle, Gbor; Boros, Borbla; Kollr, Lszl; Tetrahedron Asymmetry; vol. 25; 23; (2014); p. 1527 – 1531;,
Chiral Catalysts
Chiral catalysts – SlideShare

4488-22-6, [1,1′-Binaphthalene]-2,2′-diamine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(1) Synthesis of N,N’-di-p-toluenesulfonyl-1,1′-binaphthyl-2,2′-diamine Under nitrogen atmosphere, to a solution in which 1,1′-binaphthyl-2,2′-diamine (0.5 mmol) was dissolved in pyridine (1 mL) was added p-toluenesulfonyl chloride (1.1 mmol) at room temperature, and the mixture was reacted for 5 to 12 hours with stirring. After completion of the reaction, the resulting red suspension was diluted with ethyl acetate, and back-extracted with 1N hydrochloric acid to remove pyridine. The resulting organic layer was dried with sodium sulfate to remove the solvent, and the residue was purified by column chromatography to obtain an objective substance as a pale yellow to white solid in more than 95% yield.

4488-22-6, Big data shows that 4488-22-6 is playing an increasingly important role.

Reference£º
Patent; Terada, Masahiro; Uraguchi, Daisuke; Sorimachi, Keiichi; Shimizu, Hideo; US2007/142639; (2007); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4488-22-6,[1,1′-Binaphthalene]-2,2′-diamine,as a common compound, the synthetic route is as follows.

Under nitrogen conditions, add tris (dibenzylidene-base acetone) dipalladium (37 mg, 0.04 mmol, purchased from ANEG) to Schlenk bottles with magnetons, 1,1′-Binaphthyl-2,2′-bisdiphenylphosphine (50 mg, 0.08 mmol, purchased from Anagi), cesium carbonate (3.65 g, 11.2 mmol, purchased from Anagi), 2-trifluoromethanesulfonyl cycloheptatrienone (4.88 g, 19.2 mmol), 1,1′-bi-2-naphthylamine (2.27 g, 8 mmol, purchased from Enagi) and 50 ml of toluene. The resulting mixture was stirred at 100 C for 24 hours. The reaction was completed and the temperature was reduced to room temperature. After the toluene-insoluble solid was filtered off with diatomaceous earth, 100 mesh silica gel was added to the resulting solution to spin dry the sample. The obtained crude product was then passed through a 200-300 mesh silica gel column, using ethyl acetate as an eluent, and the eluent was spin-dried to obtain a brown solid (2.68 g, yield 68%)., 4488-22-6

The synthetic route of 4488-22-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; University of Science and Technology of China; Chen Changle; Zhang Pan; (17 pag.)CN110423246; (2019); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

The chiral-catalyst compound, name is [1,1′-Binaphthalene]-2,2′-diol,cas is 602-09-5, mainly used in chemical industry, its synthesis route is as follows.,602-09-5

Example 15: Separation of (S)-1 , 1 ‘-bi-2-naphthol from (RS)-1 ,1′-bi-2-naphthol via formation of binary/ternary co-crystal with 3-alkyl-4-(1′-phenylethylamino)butanoic acid. 3-alkyl-4-(1′-phenylethylamino)butanoic acid (0.385 moles) was dissolved in methanol (five volumes) and (RS)-1 ,1′-bi-2-naphthol (0.35 moles, i.e. 100 g) was added to it at room temperature. The mixture was stirred at 50 C for 2 hour, during which time solid precipitate came out from the reaction mixture. Reaction mixture was allowed to cool to room temperature and filtered under reduced pressure to obtain solid co-crystal.Co-crystal was suspended in methanol (five volumes) and stirred at 50 C for 2 h. After which reaction mixture was cooled to room temperature and filtered under reduced pressure to obtain pure solid co-crystal.Pure co-crystal was suspended in a biphasic mixture of ethyl acetate (2.5 volumes) and 1Lambda/ hydrochloric acid (2.5 volumes) and stirred for 30 to 45 min to decompose the complex. Aqueous phase was washed with 2 volumes of ethyl acetate. Organic phases were mixed together and washed with brine, followed by drying over sodium sulfate. Solvent was evaporated under vacuum to obtain optically pure (S)-1 ,1′-bi-2-naphthol which was analyzed for ee on chiral chromatography.Chiral chromatographic conditions for (S)-1.1′-bi-2-naphtholRetention time for (S)-1, 1′-bi-2-naphthol : 17.77 minRetention time for (R)-1, 1′-bi-2-naphthol : 20.64 minInstrument HPLC using a Shimadzu LC 2010 system equipped Pump, Injector, UV detector and Recorder Column: Chiral Pak IA, 4.6mm x 250mm, 5muiotaeta, column oven temperature 40 C Detector. UV at 230 nm.Mobile phase: n-hexane (94) :n-butanol (5) : ethanol (1): trifluoroacetic acid (0.3 mL) Flow rate: 1 mL minInjection volume: 20 muIota.Yield and enantiomeric excess of (S)-1 ,1′-bi-naphthol using various 3-alkyl-4-(1′- phenylethylamino)butanoic acids for co-crystal formation during resolution of (RS)-1 ,1 – bi-naphthol are tabulated below in table 4:Table 4* Data represented for antipode of (S)-1 ,1’-bi-naphthol.

As the rapid development of chemical substances, we look forward to future research findings about 602-09-5

Reference£º
Patent; LUPIN LIMITED; ROY, Bhairab, Nath; SINGH, Girij, Pal; LATHI, Piyush, Suresh; MITRA, Rangan; WO2012/7814; (2012); A2;,
Chiral Catalysts
Chiral catalysts – SlideShare

4488-22-6, [1,1′-Binaphthalene]-2,2′-diamine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

EXAMPLE 1 Preparation of (R)-5,5′,6,6′,7,7′,8,8′-octahydro-1,1′-binaphthyl-2,2′-diamine (R-1): 200 mg (R)-1,1′-binaphthyl-2,2′-diamine (purchased from Aldrich Chemical Company), 20 mg PtO2 and 20 mL glacial acetic acid were charged into a 50 mL autoclave equipped with a magnetic stirring bar. The autoclave was closed and 1,000 KPa hydrogen gas was charged. The solution was stirred with a magnetic stirrer for 120 hours at room temperature. After releasing the hydrogen gas and removing the solid catalyst by filtration, the mixture was neutralized with aqueous NaHCO3 solution followed by extraction with 50 mL ethyl acetate three times. The combined extracts were dried with sodium sulfate and the solvent was removed with a rotary evaporator to give 210 mg of crude product (R-1). The crude product was purified by crystallization with 5 mL ethyl acetate and 15 mL hexane to give 180 mg crystals of R-1 (87.5% of theoretical yield)., 4488-22-6

The synthetic route of 4488-22-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; The Hong Kong Polytechnic University; US5919981; (1999); A;,
Chiral Catalysts
Chiral catalysts – SlideShare